Wind Turbine Blade Transportation for Sale in Vietnam
China is the first country in the world to use wind energy. It is believed that the earliest windmill was used as early as 200 BC. Vietnam has also been building windmills in recent years, and the construction of windmills has naturally driven the demand for wind blade transportation. Recently, extendable blade trailer and wind turbine blade transportation are very popular in Vietnam. This customer saw an extendable blade trailer transporting wind blades in Vietnam last year. Since he is also engaged in transportation services, he has always been concerned about this transportation method. After observing for a year, the customer felt that investing in wind energy was a good choice. Then he contacted our company online and placed an order for a wind turbine blade transportation.
Wind Turbine Blade Trailer for Sale
1. The speed of the hydraulic power unit should not be too high when starting to prevent damage to the transmission system due to excessive instantaneous torque.
2. Operate the hydraulic valve handle slowly and steadily when turning and lifting, and do not push the handle to the end to add oil. The turret must not rotate continuously to reduce the vibration of the blades.
3. When turning and lifting, the speed should be slow, and the operation should be even. Pay attention to observation to ensure safety.
4. Try to avoid turning on severely inclined roads to prevent accidents.
5. The vehicle should be at a low speed and constant speed, reduce frequent braking, to reduce the vibration of the blades.
6. Avoid using when the wind is more than 8m/s.
7. The flat installation of the blade is beneficial to reduce the wind resistance and reduce the height.
8. When the blade needs to turn around, the height of the semi-trailer should be lowered, and the rear end of the telescopic support cylinder should be used for auxiliary support.
Wind Turbine Blade Transportation for Sale in Vietnam
1. The wind turbine blade transportation vehicle speed cannot exceed 5 kilometers during normal operation
2. The rotation speed of the hydraulic power unit should not be too high when starting to prevent damage to the rotating system due to excessive instantaneous torque.
3. Operate the hydraulic valve handle slowly and steadily during rotation and lifting, and do not push the handle to the end to add oil, and the upper turret must not rotate continuously to reduce the vibration of the blades.
4. When turning and lifting, the speed should be slow and the operation should be at a constant speed. Pay attent
ion to observation to ensure safety.
5. Try to avoid turning on severely inclined roads to prevent accidents.
6. The vehicle should be at a low speed and constant speed, reducing frequent braking to reduce blade vibration.
7. Stop transporting the blades when the wind speed is> 8m/s.
8. The flat installation of the blades is beneficial to reduce the wind resistance and lower the height.
9. When the blade needs to be turned, the height of the hydraulic axis plate should be lowered, and the hydraulic axis hydraulic outrigger should be used for auxiliary support.
10. The elevation angle of normal transport blades is 20°～30°.
11. The amount of engine oil should be checked daily, and the oil should be added in time.
12. The upper and lower slewing bearing grease nozzles are filled with grease regularly, and regular maintenance is done.
